Window terms

Here are some basic replacement window concepts you might want to consider when researching windows. We understand the confusion you may feel and we are here to help! …

Double/Triple Pane – Most replacement windows today are double paned windows which means there are two independent sections of glass kept apart at approximately 5/8 of an inch. When you have a triple pane window, that means there are three sections of glass.

Low-E – This is a metallic coating used to reflect heat (energy) back to its source. It is applied as a thin coat on the panes of glass.

Balance-This is the mechanism in a window that provides force to the bottom half of the window so it is easy to move it up and down. Older windows have a weight on a line that is hidden in the cavity of the adjacent wall. Modern systems use either constant force spiral springs or very small block and tackle arrangements.

Condensation – This is a process of moist air forming on the interior of a glass window. Often this will result in frost forming on the inside of the window.

Desiccant – Is a drying agent that is placed inside the panes of glass in a double or triple pane window, (IGU) to absorb any moisture that may get between the glass panes.

Foam Filled – Window frames are generally hollow in nature. This is because they need to be a certain size in order to be thick enough to go from the outside of the wall to and beyond the inside of the wall. If the window frame was a solid mass it would make the window very heavy, and it would have worse insulating properties than if it was hollow with air. There are windows however that are sold, and touted, as having greater insulating properties because the frames are filled with foam.

Heat Gain – The amount of heat gained from both direct sunlight and absorbed heat. On many windows there is an effort to reduce heat gain, particularly from sun light.

Insulation – When old windows are removed and new ones installed generally there will be areas that will have voids that will need to be insulated. This is especially true if the windows were of the outdated variety that had counter weights in the walls. That cavity should be insulated.

Lead Paint – All paints manufactured prior to 1978 had lead as one of the ingredients. It was found that the lead in paints posed a safety hazard to the inhabitants of a dwelling as the paint aged, cracked, peeled and became accessible to ingestion particularly with children. The opening and closing of window sashes, covered with lead paint would created a fine dust that posed a particular threat.

Replacement Windows – This is a catch all phrase for a product that is designed to be used when old windows are removed from a building or house, and a new window unit is installed.

Roll Form Aluminum – There are two types of aluminum used in window manufacturing; roll formed and extruded. Roll form tends to be thinner in nature and is finished prior to the bending process in manufacturing.

Sash – This the term for the part that holds the window, for example in a double hung window there is a top window (sash) and a bottom.

Leave a Reply

Your email address will not be published. Required fields are marked *